1. DRAIN DIFFERENTIAL OIL

(a) Stop the vehicle on a level place.

(b) for Front Differential:

(1) Using a 10 mm hexagon wrench, remove the filler plug and gasket.

(2) Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.

(3) Using a 10 mm hexagon wrench, install a new gasket and the drain plug.

Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)

(c) for Rear Differential:

(1) Using a 10 mm hexagon wrench, remove the filler plug and gasket.

(2) Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.

(3) Using a 10 mm hexagon wrench, install a new gasket and the drain plug.

Torque: 65 N·m (660 kgf·cm, 48 ft·lbf)

2. ADD DIFFERENTIAL OIL

(a) Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the differential filler plug hole. NOTICE: Too much or too little oil will lead to differential problems. After changing the oil, drive the vehicle and then check the oil level again. Oil Type: Item Oil Type and Viscosity Front differential Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent. Rear differential

Front Differential Capacity: